Liquid Metals Evapo Rust

EVAPO-RUST is an amazing rust remover A product of extensive research, EVAPO-RUST has been proven effective to remove even deep rust on all types of mild steel and iron. It is safe on all surfaces and will not harm copper, brass, aluminum, plastic, rubber or vinyl. EVAPO-RUST is non-toxic, biodegradable and contains no acids or alkalis. It is non-flammable and contains no petroleum solvents.

Environmentally Friendly

Operator Friendly

Removes rust quickly without scrubbing.

Removes Mill scale no grinding

No fumes or bad odors.

Non-toxic. Safe on skin. Non-corrosive.

Easy to use, immerse part in solution.

Water Soluble

Will not attack un-rusted steel.

Safe on other metals.

How Does it work

EVAPO-RUST^TM works at a pH of 6.1 to 7 (neutral) through selective chelation. This is a process in which a large synthetic molecule forms a bond with metals and holds them in solution. Most chelating agents bind many different metals. The active ingredient in EVAPO-RUST^TM bonds to iron exclusively. It can remove iron from iron oxide, but is too weak to remove iron from steel because the iron is held much more strongly.

DIRECTIONS

EVAPO-RUST^TM is easy to use. Fully immerse the rusted item in EVAPO-RUST^TM and check progress in about 30 minutes; no scrubbing necessary. Soak times will vary from 30 minutes to 24 hours depending on severity of rust, type of steel, and temperature. EVAPO-RUST^TM is water based, therefore the active molecules will slow down as temperature decreases and increase as temperature increases. We recommend utilizing EVAPO-RUST^TM at a bath temperature above 60° F.

EVAPO-RUST^TM has a surfactant to aid in penetrating oils and dirt. However, surface contaminants do slow the process and can shorten the life of EVAPO-RUST^TM . Oils and greases should be removed prior to de-rusting. Cleaning the part prior to soaking in EVAPO-RUST^TM will also help in the disposal of the spent product.

Generally takes 30 mins to remove light rust to 24hrs for heavy rust (5mm)

chuck before